Menu
Search
0
0

Your Cart is Empty

Mercedes-Benz V-Class

Mercedes-Benz V-Class Forged Wheel Fitment Guide

Forged wheel sizing, stance, brake-clearance planning, 5x112 PCD references, 66.6 center-bore references, customer photo cases, and street-ready engineering checks for Mercedes-Benz V-Class and V260 owners.

Written by Kevin Wang, Founder & Lead Engineer · La Forge Industries · Updated

  • 3 fitment records
  • 19-20 inch references
  • 5x112 PCD
  • 66.6 center bore
  • 890-950 kg load target
  • 2,500 Nm torque target
Start a Mercedes-Benz V-Class buildView case studies
V-Class fitment context

This guide now groups V260 customer records under the broader Mercedes-Benz V-Class platform for cleaner owner research.

Mercedes-Benz V-Class V260 diesel on LFI brushed silver monoblock forged wheels front three-quarter fitment

Mercedes-Benz V-Class V260 diesel in Singapore on LFI brushed silver monoblock forged wheels, build LF21112022_530.

4selected customer fitment records
5x112PCD reference checked
950 kgload target reviewed
Overview

Fitment ContextReal Customer Cars

This guide helps Mercedes-Benz V-Class owners choose forged wheels with the right stance, tire support, brake clearance, and road manners. The goal is simple: a wheel that looks right, fits properly, and feels sharp on the actual car.

Chassis-Matched

Width, offset, and concavity specified to the vehicle, not pulled from a generic size chart.

Brake Clearance

Spoke profile, barrel shape, and backpad are reviewed around the exact brake package.

Forged Response

Lower unsprung mass can sharpen steering, braking feel, and ride control.

Quick Specs

FitmentSnapshot

Area Guide value Fitment note
PCD 5x112 Confirm exact vehicle before machining.
Center bore 66.6 Machine hub-centric to the confirmed car.
Wheel sizes 19x8.0 ET38 / 20x8.5 ET40 / 20x8.5 ET35 / 20x8.5 ET43 Review tire, brake, fender and ride height together.
Wheel models LFI monoblock forged / LFI custom build / Existing Custom Design - Bronze Face profile depends on brake and load target.
Engineering Proof

Load And TorqueValidation Logic

Wheel fitment is more than diameter and offset. LFI reviews vertical load, braking and drive torque, spoke-root behavior, hub-pad stress, bolt-seat stress, and combined load cases before final production.

Why load rating still matters

For this guide, LFI uses a Mercedes V-Class axle-load baseline of 1550 kg, or 775 kg per wheel, from manufacturer-published V-Class axle-load data for heavier passenger variants. The preferred customer-facing target in this table is 890 kg per wheel, with 950 kg used when the vehicle plate, equipment, tire load, duty cycle, or 1650 kg rear-axle variant calls for extra reserve.

Torque is part of the wheel story

Wheel strength is not only vertical load. LFI also reviews acceleration, braking, cornering, potholes, tire grip, hub-pad stress, bolt-seat stress, spoke-root stress, and rim-barrel torque reaction against an approximately 2,500 Nm per wheel static torque load target.

If you want the manufacturing side of the process, LFI's How LFI Wheels Are Made page shows the design, forging, CNC machining, finishing, and QC logic behind a custom forged wheel before it ever reaches the car.

Wheel load rating Per-axle equivalent Margin vs axle baseline Status How LFI positions it
690 kg 1380 kg per axle -11% vs 775 kg/wheel Not recommended Below the V-Class axle-load baseline; only suitable if a specific vehicle plate supports a lighter requirement.
790 kg 1580 kg per axle +2% vs 775 kg/wheel Plate check Meets the 1550 kg axle reference only narrowly; confirm the exact axle label and use case before selecting it.
890 kg 1780 kg per axle +15% vs 775 kg/wheel Preferred Primary road-use, fast-road, and daily forged target for V-Class passenger applications.
950 kg 1900 kg per axle +23% vs 775 kg/wheel Preferred Extra reserve for heavier equipment, full passenger use, harsher roads, repeated high-speed driving, or 1650 kg rear-axle variants.
Torque-load target: approximately 2,500 Nm per wheel under conservative dry-braking validation.
Validation load case Reference basis Suggested LFI target Why it matters
Radial vehicle load Vehicle mass, passengers, tire package, and selected wheel load target 890 kg preferred target; 950 kg extra reserve where required Represents vehicle mass and repeated road loading.
Torque load Conservative 1g dry braking check with 60% front bias ~2,500 Nm per wheel Loads the hub pad, bolt seats, spoke roots, and rim barrel.
Cornering load Lateral force from road grip, sticky tires, and fast-road or track use Application-specific Shows how the wheel behaves when the chassis loads sideways during aggressive cornering.
Combined static load case Radial load + torque load + cornering load Application-specific More realistic than isolated vertical checks because real driving loads rarely occur one at a time.

Engineering Article

Why Radial-Load FEAAlone Is Not Enough

For forged wheel applications, vertical load is only one part of the engineering picture. LFI also reviews spoke-root stress, hub-pad loading, bolt-seat behavior, rim-barrel stress, and combined static road-load cases where relevant.

Read LFI Combined-Load FEA Article
Mercedes-Benz V-Class platform warning: Check PCD (5x112), centre bore (66.6), brake package, hub-seat style, hardware seat, and tyre shoulder before machining. SUV and van platforms need extra attention to axle load, tyre load index, brake clearance, and rough-road duty cycle before finalising wheel load rating or concavity.
Testing & Validation

Standards, TestingAnd Internal Validation

Term Meaning How it applies to LFI custom wheels
JWL Japanese technical standard for light alloy wheels. Used as a reference standard for relevant load and durability requirements.
VIA Japanese third-party wheel registration and verification system. Applies only to specific wheel models/specifications that are formally registered.
TÃœV European technical testing or certification framework. Applies only when a specific wheel/specification has supporting TÃœV documentation.
SAE Common industry test framework for aftermarket wheel performance and impact evaluation. Useful for impact and fatigue validation depending on market and specification.
Internal validation LFI's own engineering and test process. Used for bespoke specifications built from validated design families.
Static FEA Computer-based engineering simulation. Used before machining to evaluate stress, weight, torque load, and clearance.

Selected high-volume reference specifications may be supported by external lab reporting or third-party documentation. Bespoke Mercedes-Benz V-Class specifications are engineered from the same design families and reviewed through LFI's internal design, load, brake-clearance, and fitment-validation process. See LFI's Testing & Compliance for published standards and test references.

JWL wheel testing standard logo
Reference test basis: CSF1 19x9 ET29 was tested to JWL Aug. 2014 conditions at the stated load.
TUV SUD accredited laboratory logo
Named lab route: the reference report runs through a TUV SUD accredited lab. Each custom order still gets its own load, brake, tyre, and fitment review.
Case Studies

Customer Fitment StoriesPhoto And Spec Cases

Mercedes-Benz V-Class V260 diesel on 19x8.0 ET38 LFI monoblock forged wheels

This Singapore V260 diesel build started from a C180-labelled order sheet, but the wheels were ultimately fitted to the V-Class platform. The final reference is a square 19x8.0 ET38 forged setup with 5x112 PCD, 66.6 hub-centric bore, brushed silver finish, LFI brushed silver centre caps, and Monobloc engraving direction.

  • Square 19 inch daily setup
  • Brushed silver finish
  • LFI brushed silver centre caps
  • Monobloc engraving direction
Fitment note:

The sheet requested as much concavity as practical, but V-Class load target, brake clearance, spoke shape, and sliding-door body clearance still take priority before production.

Mercedes-Benz V-Class V260 diesel with LFI brushed silver monoblock forged wheels
Full-car V260 diesel reference for the LF21112022_530 19x8.0 ET38 brushed silver setup.
Ask LFI about this fitment

2020 Mercedes-Benz V-Class V260 LFI custom build fitment

This setup gives 2020 Mercedes-Benz V-Class owners a real-world reference for stance, brake clearance, tire shoulder, and forged-wheel proportions.

Customer images coming soon

This is an actual LFI customer build record. Installed photos will be added once the customer provides them.

Ask LFI about this fitment

2020 Mercedes-Benz V-Class V260 Existing Custom Design - Bronze fitment

This setup gives 2020 Mercedes-Benz V-Class owners a real-world reference for stance, brake clearance, tire shoulder, and forged-wheel proportions.

Customer images coming soon

This is an actual LFI customer build record. Installed photos will be added once the customer provides them.

Ask LFI about this fitment
Global Support

Mercedes-Benz V-Class BuildsFrom Singapore to Global Customers

LFI supports Mercedes-Benz V-Class customers with vehicle-specific forged wheel consultation, DDP supply where available, and direct Singapore / Malaysia support. Fitment recommendations are based on the confirmed vehicle, brake package, tyre target, load requirement, and intended use.

Fitment Consultation

LFI helps owners choose between OEM+, lightweight square, brake-clearance, show-style, and track-focused forged setups.

Road & Tire Conditions

City roads, highways, potholes, wet-weather tires, ride comfort, and tire availability can all change the best wheel and tire recommendation.

Global Supply

LFI offers Duty Paid Shipping (DDP) to major markets, so eligible customers pay the confirmed landed price with no extra import tariffs or taxes due on delivery.

Singapore / Malaysia Direct Support

Singapore customers can visit LFI at 76 Playfair Road, #01-03, Singapore 367996 to view forged wheel samples, finishes, concavity profiles, and selected in-stock wheels.

Malaysia customers can order directly with LFI and request pre-production consultation for road use, track use, tire availability, and brake clearance.

View LFI on Google Maps
External References

Platform & TestingReference Links

Reference What it supports Link
Owner Manual / VIN Data Factory tire, wheel, tire-pressure, and axle-label information for the exact vehicle. Owner Manual / VIN Data
JWL / VIA Wheel Standards Japanese light-alloy wheel standard and third-party verification context for JWL / JWL-T marking and VIA registration. Japan Light Alloy Automotive Wheel Testing Council
TÃœV SÃœD Wheel Testing Independent laboratory testing context for wheels, materials, components, fatigue testing, impact testing, and international wheel standards. TÃœV SÃœD Wheel Testing
Standards Testing Laboratories Automotive wheel test-lab context for fatigue, impact, load / deflection, and compliance-related validation. STL Testing Services
SAE J2530 Aftermarket passenger-car and light-truck wheel performance requirements and test-method context. SAE J2530
FAQ

FitmentFAQ

Are the Mercedes-Benz V-Class Forged Wheel Fitment Guide case studies real LFI customer builds?

Yes. The case studies are based on real LFI forged-wheel customer projects and fitment records.

What PCD does LFI confirm before machining?

Recorded LFI references point to 5x112 PCD. LFI confirms the exact vehicle before machining.

How is the hub bore confirmed?

Recorded hub-bore references show 66.6. LFI confirms the hub-centric machining value against the actual car before quoting or production.

What wheel size is a sensible starting point?

A recorded starting point is 19x8.0 ET38 or 20x8.5 ET40 / 20x8.5 ET35. Tyre pairing, brake clearance and ride height are confirmed around the actual car.

Can LFI build this fitment without spacers?

Yes, when the offset, brake clearance, and body clearance are engineered into the forged wheel specification.

Why do some cases show customer images coming soon?

Some recorded builds have full specification value while customer images are still pending.

What should I send before LFI quotes a build?

Send the model year, trim, brake package, tyre target, ride height, alignment notes, PCD, hub bore, hardware seat, centre-cap plan, finish, load target and intended use.

Can Singapore, Malaysia, and international owners order directly from LFI?

Yes. LFI supports local Singapore and Malaysia customers and ships forged wheels internationally with fitment consultation.

Can I choose a different finish from the photos?

Yes. The photos are fitment references. LFI can quote gloss, satin, brushed, polished, bronze, black, silver, and custom finishes depending on the wheel design.

Do I need to copy the exact photographed setup?

No. The photographed setup is a proven reference point, but LFI can adjust width, offset, concavity, finish, and tire pairing around your car and goals.

Will these wheels clear big brakes?

Brake clearance depends on the caliper template, barrel profile, spoke shape, backpad, and final offset. LFI checks these before machining.

Can LFI build a more comfortable daily setup?

Yes. A comfort-biased setup can use a more conservative width, sensible offset, and tire sizing with enough sidewall for road use.

Can LFI build a more aggressive show setup?

Yes, but fender clearance, steering clearance, tire shoulder, ride height, and alignment need to be checked together.

Can I keep factory center caps?

Often yes, if the cap diameter, clip style, pocket depth, and face profile are planned before production.

Are square setups available?

Yes. Square setups are popular when owners want easy tire rotation, predictable handling, and a clean road-use package.

Are staggered setups available?

Yes. Staggered setups can work when the platform, tire diameter, and drivetrain requirements support it.

Why does LFI care about tire shoulder shape?

Two tires with the same printed size can sit differently. Shoulder shape affects fender clearance, steering clearance, and the final stance.

Why not order by offset alone?

Offset only tells part of the story. Width, tire size, brake clearance, hub geometry, concavity, and ride height all affect whether the setup works.

Can LFI ship internationally?

Yes. LFI supports international forged-wheel orders and can prepare fitment consultation remotely before production.

Start Your Mercedes-Benz V-ClassBuild

Share your model year, brake package, tire target, ride height, alignment, center-cap plan, and finish target so LFI can confirm the forged wheel specification.

Request a fitment quote
LFI Updates

Subscribe For New Builds

Sign up to get the latest on new LFI forged wheel designs, customer builds, engineering articles, and selected product releases.

No spam — just LFI product, engineering, and build updates.