Split-spoke structure
Nine visible spokes from twelve roots create a layered face without losing the clean forged monoblockk base.
MF912 Monoblock Forged Wheel
$355.00
Price per Wheel
Material6061-T6 forged aluminium
Sizing18-24 inch
WarrantyLifetime Warranty
Offset-44 to +70
Load targetUp to 1050 kg
Forging12,000-ton forged
Monoblock Forged Series / Custom Forged
MF912Monoblock Forged Wheel
MF912 is a split-spoke monoblock with nine visible spokes from twelve structural roots. It gives a sharper performance face and broad vehicle coverage while keeping the build one-piece and forged.
Starting from USD 355 per wheel
MF912Built Around The Car
A sharper split-spoke look for daily driver builds, sport sedans and cars that need a cleaner performance wheel.
16-24inch made-to-order diameter range
3J-13Jwidth range confirmed around your vehicle
1050 kg per wheelload target for suitable vehicle applications
USD 355starting price before size and finish choices
Split-spoke monoblockk forgedForged Monoblock
Vehicle-specific fitment
The fitment is confirmed around the actual car before machining, including stance, brake room and hub details.
Forged construction
MF912 uses 6061-T6 forged aluminium. The aim is cleaner fitment, better strength-to-weight balance and a wheel made around the build.
The photographed wheel shows one possible build. Face profile, centre depth and lip relationship can change with the final vehicle package.
MF912Shown Wheel
What changes per car
The exact face depth, spoke clearance and barrel relationship are driven by the final vehicle package.
For the full build check, LFI confirms diameter, width, offset, PCD, centre bore, brake clearance, load target and finish once the vehicle details are known.
Send LFI your current wheel and tyre sizes, brake package, ride height, vehicle use and finish choice before locking the order.
MF912Build Specs
| Specification | MF912 value | Build note |
|---|---|---|
| Model | MF912 Monoblock Forged Wheel | Custom made-to-order LFI monoblock wheel. |
| Construction | Monoblock forged aluminium wheel | One-piece forged wheel architecture. |
| Material | 6061-T6 forged aluminium | Core forged-wheel material. |
| Forging | 6061-T6 forged monoblock blank | Machined after the vehicle fitment is confirmed. |
| Design | Split-spoke monoblockk forged face | Centre profile and brake clearance are confirmed per vehicle. |
| Diameter range | 16 to 24 inch | Final diameter depends on brake package, tyre plan and vehicle use. |
| Width range | 3J to 13J | Supports vehicle-specific daily, stance and performance fitments. |
| Offset range | ET -44 to ET +70 | Design and forging profile dependent. |
| Load target | Up to 1050 kg per wheel | Checked against vehicle mass, tyre package and use case. |
| Brake clearance | Built to order | Caliper envelope, barrel clearance and spoke profile reviewed before machining. |
| Warranty | Lifetime structural warranty | Subject to LFI warranty terms. |
| Starting price | USD 355 per wheel | Before final size, finish and load-target choices. |
Fitment PlanningFor Your Build
Singapore fitment planning
LFI plans each MF912 set from Singapore around the car's brake package, tyre target, ride height, hub details, TPMS transfer and finish choice.
USA and international orders
US and international customers can order in English through WhatsApp or email. Send vehicle photos, brake details, current wheel and tyre sizes, ride height, fitment goals, intended use and delivery ZIP/postcode.
Where MF912Makes Sense
Daily performance cars
Clean road builds benefit from a forged wheel that is specified around the actual tyre, ride height and brake package.
Sport sedans and coupes
MF912 works when the car needs a sharper one-piece wheel with enough offset accuracy and brake clearance to avoid spacer correction.
Selected high-load builds
For heavier platforms, LFI checks Up to 1050 kg per wheel against the actual axle load, tyre package and driving use before recommending the wheel setup.
LifetimeStructural Warranty
MF912 Monoblock Forged Wheel carries lifetime structural warranty, subject to LFI's full warranty terms and exclusions.
What it covers
The warranty covers structural-integrity defects in the forged wheel under LFI's published warranty terms.
What to check
Coverage is limited by the full warranty terms, including exclusions for impact damage, misuse, improper tyre use, road hazards, unauthorised repair, refinishing, heating, bending, cutting or welding.
MF912Technical FAQ
What is LFI MF912?
MF912 is a 6061-T6 forged aluminium monoblock forged wheel. LFI builds it to the vehicle rather than selling one fixed catalogue fitment.
What sizes can MF912 be built in?
MF912 is planned across 16 to 24 inch, with widths from 3J to 13J. LFI confirms the final fitment against the vehicle before production.
What offset range is available?
The listed design range is ET -44 to ET +70, subject to selected diameter, width, centre profile, brake clearance and the available forging profile.
What load target does MF912 use?
MF912 is planned up to 1050 kg per wheel. LFI checks the final load target against the vehicle mass, tyre package and intended use.
Does MF912 include warranty?
Yes. MF912 carries lifetime structural warranty, subject to LFI's full warranty terms and exclusions.
Can MF912 clear large brakes?
Brake clearance is checked before machining using the actual caliper envelope, barrel shape, spoke profile, backpad and offset target.
Which cars suit MF912?
MF912 suits daily performance cars, refined sport sedans, coupes, GT cars and selected high-load applications when the brake package and fitment envelope work together.
What information does LFI need before quoting MF912?
Send the vehicle model, year, brake package, current wheel and tyre sizes, ride height, intended use, preferred stance, finish choice and delivery country or postcode.
Made To Order
Build MF912 Around Your Car
Send LFI your vehicle, brake package, current wheel and tyre size, ride height, and how you use the car. LFI will confirm whether MF912 is the right wheel before machining.