Menu
Search
0
0

Your Cart is Empty

Tesla Cybertruck

Tesla Cybertruck Forged Wheel Fitment Guide

Forged wheel sizing, stance, brake-clearance planning, 6x139.7 PCD references, 84.1 center-bore references, customer photo cases, and street-ready engineering checks for Tesla Cybertruck owners.

Written by Kevin Wang, Founder & Lead Engineer · La Forge Industries · Updated

  • 2 fitment records
  • 2 photo-backed cases
  • 1400 kg load target
  • 3,100 Nm torque target
  • 6x139.7 PCD
  • 84.1 center bore
Start a Tesla Cybertruck buildView case studies
Tesla Cybertruck 24 inch LFI TOS-01 forged wheel build with floating center caps
Tesla Cybertruck with a 24-inch LFI TOS-01 monoblock forged square setup.
Overview

Fitment ContextReal Customer Cars

This guide helps Tesla Cybertruck owners choose forged wheels with the right stance, tire support, brake clearance, and road manners. The goal is simple: a wheel that looks right, fits properly, and feels sharp on the actual car.

Street Fitment

Balanced sizing for daily driving, tire availability, and clean fender clearance.

Brake Clearance

Spoke profile, barrel shape, and backpad are reviewed around the exact brake package.

Forged Response

Lower unsprung mass can sharpen steering, braking feel, and ride control.

Quick Specs

FitmentSnapshot

Area Guide value Fitment note
PCD 6x139.7 Confirm exact vehicle before machining.
Center bore 84.1 Machine hub-centric to the confirmed car.
Wheel sizes 24x9 ET58 Review tire, brake, fender and ride height together.
Wheel models Custom F design Face profile depends on brake and load target.
Engineering Proof

Load And TorqueValidation Logic

Wheel fitment is more than diameter and offset. LFI reviews vertical load, braking and drive torque, spoke-root behavior, hub-pad stress, bolt-seat stress, and combined load cases before final production.

Why load rating still matters

For this guide, LFI uses the Tesla owner-manual Cybertruck rear GAWR table, taking the highest listed 2380 kg rear-axle rating, or 1190 kg per wheel. The preferred customer-facing target in this table is 1400 kg per wheel when the wheel family allows it.

Torque is part of the wheel story

Wheel strength is not only vertical load. LFI also reviews acceleration, braking, cornering, potholes, tire grip, hub-pad stress, bolt-seat stress, spoke-root stress, and rim-barrel torque reaction against an approximately 3,100 Nm per wheel static torque load target.

If you want the manufacturing side of the process, LFI's How LFI Wheels Are Made page shows the design, forging, CNC machining, finishing, and QC logic behind a custom forged wheel before it ever reaches the car.

Wheel load rating Per-axle equivalent Margin vs axle baseline Status How LFI positions it
1050 kg 2100 kg per axle -12% vs 1190 kg/wheel Low reserve Use only after exact axle data, tire load, and duty cycle are confirmed.
1200 kg 2400 kg per axle +1% vs 1190 kg/wheel Low reserve Use only after exact axle data, tire load, and duty cycle are confirmed.
1400 kg 2800 kg per axle +18% vs 1190 kg/wheel Preferred Road-use, fast-road, and daily forged applications with a useful axle-load reserve.
1600 kg 3200 kg per axle +34% vs 1190 kg/wheel Extra reserve Extra reserve for truck payload, towing-related heat, high-speed EV weight, rough-road impacts, and aggressive tire packages.
Torque-load target: approximately 3,100 Nm per wheel under conservative dry-braking validation.
Validation load case Reference basis Suggested LFI target Why it matters
Radial vehicle load Vehicle mass, passengers, tire package, and selected wheel load target 1400 kg preferred target Represents vehicle mass and repeated road loading.
Torque load Conservative 1g dry braking check with 60% front bias ~3,100 Nm per wheel Loads the hub pad, bolt seats, spoke roots, and rim barrel.
Cornering load Lateral force from road grip, sticky tires, and fast-road or track use Application-specific Shows how the wheel behaves when the chassis loads sideways during aggressive cornering.
Combined static load case Radial load + torque load + cornering load Application-specific More realistic than isolated vertical checks because real driving loads rarely occur one at a time.

Engineering Article

Why Radial-Load FEAAlone Is Not Enough

For forged wheel applications, vertical load is only one part of the engineering picture. LFI also reviews spoke-root stress, hub-pad loading, bolt-seat behavior, rim-barrel stress, and combined static road-load cases where relevant.

Read LFI Combined-Load FEA Article
Testing & Validation

Standards, TestingAnd Internal Validation

Term Meaning How it applies to LFI custom wheels
JWL Japanese technical standard for light alloy wheels. Used as a reference standard for relevant load and durability requirements.
VIA Japanese third-party wheel registration and verification system. Applies only to specific wheel models/specifications that are formally registered.
TUV European technical testing or certification framework. Applies only when a specific wheel/specification has supporting TUV documentation.
SAE Common industry test framework for aftermarket wheel performance and impact evaluation. Useful for impact and fatigue validation depending on market and specification.
Internal validation LFI's own engineering and test process. Used for bespoke specifications built from validated design families.
Static FEA Computer-based engineering simulation. Used before machining to evaluate stress, weight, torque load, and clearance.

Selected high-volume reference specifications may be supported by external lab reporting or third-party documentation. Bespoke Tesla Cybertruck specifications are engineered from the same design families and reviewed through LFI's internal design, load, brake-clearance, and fitment-validation process. Customers can also review LFI's Testing & Compliance page for the broader testing-language context.

JWL wheel testing standard logo
Reference test basis: CSF1 19x9 ET29 was tested to JWL Aug. 2014 conditions at the stated load.
TUV SUD accredited laboratory logo
Named lab route: the reference report runs through a TUV SUD accredited lab. Each custom order still gets its own load, brake, tyre, and fitment review.
Case Studies

Customer Fitment StoriesPhoto And Spec Cases

Case Study 1 - Photo-backed fitment
VehicleTesla Cybertruck 2024 / 2025
Build RefsINV2024-37-2793 & INV2025-OM-001
Wheel ModelLFI TOS-01 Truck & Off Road Forged Wheel
Specs24x9.0 ET58 square
Tires315/45R24 or 295/45R24
FinishGloss Black

Massive 24-Inch LFI TOS-01 Cybertruck Build with Floating Caps

To fill the Cybertruck's angular wheel arches, this customer chose a 24-inch square setup. Maintaining a 9.0-inch width with an ET58 offset keeps the wheel visually large while remaining aerodynamically tucked and less likely to throw debris down the stainless body panels.

The setup is based on the LFI TOS-01 Truck & Off Road Forged Wheel, configured for Cybertruck's 6x139.7 bolt pattern, high-offset stance, and heavy EV-truck load requirements. It includes a custom floating center cap engineered for the 6x139.7 bolt pattern so the engraved LFI logo remains upright.

Tesla Cybertruck 24 inch LFI TOS-01 forged wheel build with floating center caps
Tesla Cybertruck with a 24-inch LFI TOS-01 monoblock forged square setup.
Shop TOS-01 forged wheels for Tesla Cybertruck
Global Support

Tesla Cybertruck BuildsFrom Singapore to Global Customers

LFI supports Tesla Cybertruck customers with vehicle-specific forged wheel consultation, DDP supply where available, and direct Singapore / Malaysia support. Fitment recommendations are based on the confirmed vehicle, brake package, tyre target, load requirement, and intended use.

Fitment Consultation

LFI helps owners choose between OEM+, lightweight square, brake-clearance, show-style, and track-focused forged setups.

Road & Tire Conditions

City roads, highways, potholes, wet-weather tires, ride comfort, and tire availability can all change the best wheel and tire recommendation.

Global Supply

LFI offers Duty Paid Shipping (DDP) to major markets, so eligible customers pay the confirmed landed price with no extra import tariffs or taxes due on delivery.

Singapore / Malaysia Direct Support

Singapore customers can visit LFI at 76 Playfair Road, #01-03, Singapore 367996 to view forged wheel samples, finishes, concavity profiles, and selected in-stock wheels.

Malaysia customers can order directly with LFI and request pre-production consultation for road use, track use, tire availability, and brake clearance.

View LFI on Google Maps
External References

Platform & TestingReference Links

Reference What it supports Link
Tesla Cybertruck Owner Manual Tesla owner-manual vehicle weight table listing Cybertruck rear GAWR up to 2380 kg. Tesla Cybertruck Owner Manual
Tesla Owner Manuals Vehicle-specific tire, wheel, load, and service reference for Tesla platforms. Tesla Owner Manuals
JWL / VIA Wheel Standards Japanese light-alloy wheel standard and third-party verification context for JWL / JWL-T marking and VIA registration. Japan Light Alloy Automotive Wheel Testing Council
TUV SUD Wheel Testing Independent laboratory testing context for wheels, materials, components, fatigue testing, impact testing, and international wheel standards. TUV SUD Wheel Testing
Standards Testing Laboratories Automotive wheel test-lab context for fatigue, impact, load / deflection, and compliance-related validation. STL Testing Services
SAE J2530 Aftermarket passenger-car and light-truck wheel performance requirements and test-method context. SAE J2530
FAQ

FitmentFAQ

Are the Tesla Cybertruck Forged Wheel Fitment Guide case studies real LFI customer builds?

Yes. The case studies are based on real LFI forged-wheel customer projects and fitment records.

What PCD does LFI confirm before machining?

The most common recorded PCD in this guide is 6x139.7. LFI must confirm the exact vehicle before production.

How is the hub bore confirmed?

Recorded hub-bore references show 84.1. LFI confirms the hub-centric machining value against the actual car before quoting or production.

What wheel size is a sensible starting point?

A recorded starting point is 24x9 ET58. Tyre pairing, brake clearance and ride height are confirmed around the actual car.

Can LFI build this fitment without spacers?

Yes, when the offset, brake clearance, and body clearance are engineered into the forged wheel specification.

Why do some cases show customer images coming soon?

Some recorded builds have full specification value while customer images are still pending.

What should I send before LFI quotes a build?

Send the model year, trim, brake package, tyre target, ride height, alignment notes, PCD, hub bore, hardware seat, centre-cap plan, finish, load target and intended use.

Can Singapore, Malaysia, and international owners order directly from LFI?

Yes. LFI supports local Singapore and Malaysia customers and ships forged wheels internationally with fitment consultation.

Can I choose a different finish from the photos?

Yes. The photos are fitment references. LFI can quote gloss, satin, brushed, polished, bronze, black, silver, and custom finishes depending on the wheel design.

Do I need to copy the exact photographed setup?

No. The photographed setup is a proven reference point, but LFI can adjust width, offset, concavity, finish, and tire pairing around your car and goals.

Will these wheels clear big brakes?

Brake clearance depends on the caliper template, barrel profile, spoke shape, backpad, and final offset. LFI checks these before machining.

Can LFI build a more comfortable daily setup?

Yes. A comfort-biased setup can use a more conservative width, sensible offset, and tire sizing with enough sidewall for road use.

Can LFI build a more aggressive show setup?

Yes, but fender clearance, steering clearance, tire shoulder, ride height, and alignment need to be checked together.

Can I keep factory center caps?

Often yes, if the cap diameter, clip style, pocket depth, and face profile are planned before production.

Are square setups available?

Yes. Square setups are popular when owners want easy tire rotation, predictable handling, and a clean road-use package.

Are staggered setups available?

Yes. Staggered setups can work when the platform, tire diameter, and drivetrain requirements support it.

Why does LFI care about tire shoulder shape?

Two tires with the same printed size can sit differently. Shoulder shape affects fender clearance, steering clearance, and the final stance.

Why not order by offset alone?

Offset only tells part of the story. Width, tire size, brake clearance, hub geometry, concavity, and ride height all affect whether the setup works.

Can LFI ship internationally?

Yes. LFI supports international forged-wheel orders and can prepare fitment consultation remotely before production.

Start Your Tesla CybertruckBuild

Share your model year, brake package, tire target, ride height, alignment, center-cap plan, and finish target so LFI can confirm the forged wheel specification.

Request a fitment quote
LFI Updates

Subscribe For New Builds

Sign up to get the latest on new LFI forged wheel designs, customer builds, engineering articles, and selected product releases.

No spam — just LFI product, engineering, and build updates.